Loaded Pintail

Loaded Pintail Longboard Complete

The Loaded Pintail comes equipped with 70mm 78a Krypto Route 70s for grippy controlled slides

Length: 35"
Wheel Base: 29"
Deck Weight: 2.6 lbs
Complete Weight: 6 lbs

The Ride:
You will stop sleeping. Sorry, but it�s true. Versatile, light and fluid, these boards are designed to promote an assertive, dynamic riding style. It�ll hold it�s own on hills, riding banks, as a commuter, and for beer runs. But if you�re anything like us, it�s all about the late night parking garage sessions. Glassy eyes and a permanent grin.

Construction:
� Epoxy and Tri-axle fiberglass sandwich a vert-lam Bamboo core, pressed into concave and convex cambers for liveliness, responsiveness and high energy potential.
� Asymmetrical Shape:
� Increased torsional stiffness for higher energy return
� Can be ridden either way depending on riding style
� Tapered ends
� Pivots off the trucks for control and energy generation.
� Eliminates wheel bite.
� Sprayed on clear grip
� doesn�t effect the flex of the board
� not too abrasive but still grippy
� can be scraped off and traditional grip applied if desired

Flex
Currently Available in four flexes. Check out the flex chart to determine the most appropriate board for your stance weight and style. Keep in mind that a softer flex pattern will give you more control and tighter turns at a wide range of speeds, but tend to lose stability slightly at higher speeds. Stiffer flex means more energy potential and more stability at higher speeds, but will not be as forgiving and lively when cruising. Paris 150s:

Flex 1 - 170 - 250lbs
Flex 2 - 140 - 220lbs
Flex 3 - 110 - 190lbs
Flex 4 - 80 - 160lbs

The deck was designed around the Paris 150 truck with outerset wheels. It is a stable, lightweight, and quick turning truck that works synergistically with the deck.

Our stiffest flex board (Flex 1) is specially configured with the stiffer Red bushings for heavier riders. All other flexes come with the standard high quality yellow bushings.

Wheels:
70mm 78a Krypto Route 70s:
Very grippy and the shape allows for controlled slides when pushed. We have used these wheels for many years and think very highly of them.

The wheelwells can handle any outerset wheels from 65-80mm and preferably wide and soft. If you plan on doing much sliding we recommend a rounded radius wheel. There are many great wheels out there and we particularly recommend checking out Abec 11.

Bearings:
Max Abec 5
There are many great bearings and we particularly recommend Bones Swiss. We use and recommend bearing spacers to reduce load on the bearings and extend their life.

Additional setup options:
Play around with kingpin tightness to adjust the looseness of the trucks. Bushings can be swapped out to adjust the ride as well. We recommend the Bones Hardcore Bushings (although they are a little low for the Randals). Be sure to find a wheel appropriate for your riding style and desired speed.